Table of Contents
Advertisement
®
R&S
NGE100B
Figure 5-6: Main menu
2. Navigate the menu via the rotary knob or arrow keys.
3. Press the rotary knob or [Enter] key to enter the submenu.
4. Press
already at the main menu level. Alternatively, press [Menu] key to exit the menu
mode from any menu level.
Table 5-2: Main menu hierarchy
Menu
Output
Interface
Device
Utilities
Table 5-3: Output menu hierarchy
Menu
Output
User Manual 5601.1343.02 ─ 09
key to return to the previous menu level or exit the menu mode if it is
Descriptions
Menu items related to the instrument's output functions.
Menu items related to connection setup.
Menu items related to the instrument's general settings, reset function and infor-
mation about the instrument.
Menu items such as system test, firmware update function and information for
service.
Menu items
Protection
Fuse
EasyArb
EasyRamp
Descriptions
Configures the OVP and OPP protection settings for the
instrument. See
Chapter 6.5,
Configures the fuse delay and fuse linking function of the
channel. See
Chapter 6.3.2, "Fuse delay, fuse
on page 42.
Programs the waveform of the instrument voltage and cur-
rent settings for Ch 1. See
Chapter 6.7.1,
on page 49.
Configures the ramping time of the voltage for selected
channel. See
Chapter 6.7.2,
Operating basics
Front panel keys
"Protection",
on page 44.
linking",
"EasyArb",
"EasyRamp",
on page 50.
34
Advertisement
Table of Contents
