®
R&S
NGE100B
Access:
1. Press [Menu] key.
2. Select "Device" menu item to configure the required instrument settings.
3. Select "Utilities" menu item to configure the utilities services.
6.10.1 Instrument information
The "Information" dialog provides the general instrument information of R&S
NGE100B.
► Select "Information" menu item.
The R&S NGE100B displays the "Information" dialog. See
Figure 6-22: Information dialog
Device information
"Device Model"
"Serial Number"
"Material Number"
"Firmware Version"
"Calibration Date"
"MAC Address"
"Export OSA to USB"
User Manual 5601.1343.02 ─ 09
Instrument functions
General instrument settings
Figure
Description
Model of the instrument, i.e. NGE102B or
NGE103B.
Unique identification number for the instrument.
Instrument orderable part number.
Software version that is installed in the instrument.
The last registered date when calibration was car-
ried out on the instrument.
MAC address of the network interface.
The open-source acknowledgment (OSA) of the
R&S NGE100B can be exported to USB stick for ref-
erence.
6-22.
64