Table of Contents
Advertisement
®
R&S
NGE100B
TRIGger:OUT:SOURce:DIO<IO> <arg0>
This command sets or queries the control source of the trigger output of the specified
Digital I/O line.
Suffix:
<IO>
Parameters:
<arg0>
TRIGger:OUT:VOLTlevel:DIO<IO> <Voltage>
This command sets or queries the threshold voltage level of the trigger output of the
specified Digital I/O line.
Triggers when output voltage level exceeds or equals to the set level.
Suffix:
<IO>
Parameters:
<Voltage>
TRIGger:RCL <arg0>
This command recalls DIO settings from the respective memory locations M1-M5.
Parameters:
<arg0>
Example:
Usage:
TRIGger:SAV <arg0>
This command saves DIO settings into the respective memory locations M1-M5
Parameters:
<arg0>
Example:
Usage:
User Manual 5601.1343.02 ─ 09
.
1..4
CH1
Trigger output source from Ch 1.
CH2
Trigger output source from Ch 2.
CH3
Trigger output source from Ch 3.
*RST:
CH1
.
1..4
*RST:
0.0
Default unit: V
Range:
0..4
TRIG:RCL 1
Setting only
Range:
0..4
TRIG:SAV 1
Setting only
Remote control commands
Advanced operating commands
101
Advertisement
Table of Contents
