Easyramp - R&S NGE100B User Manual

®
R&S NGE100B
8. Press [Menu] key to return to the
The [Enter] key is illuminated.
9. Press [Output] key to enable the R&S NGE100B output.
10. Press [Enter] key to start the EasyArb function.
11. Long press on the [Enter] key to stop the EasyArb function.
Table 6-3: EasyArb input field
EasyArb input field
EasyArb mode
Data points
Repetition
EasyArb table
Clear
Apply

6.7.2 EasyRamp

With EasyRamp, the R&S NGE100B provides you the operating condition to output a
constant rise of the supply voltage. The output voltage can be increased continuously
within a 10 ms to 10 s timeframe. See
User Manual 5601.1343.02 ─ 09
Channel display area.
Description
Enable or disable the EasyArb function.
If enabled, the EasyArb function is activated in Ch 1.
See "EasyArb function"
Set the number of data points in the EasyArb table.
Each data point contains the settings for "Voltage",
"Current" and "Duration".
Set the number of times the waveform is output in
the EasyArb table. If this is set to "0", the waveform
is output continuously.
Configures the EasyArb data table. Use the arrow
keys to navigate the "Voltage", "Current" and "Dura-
tion" settings.
Reset all the data points in the EasyArb table to
0.00 V, 1.000 A and 0.01 s for "Voltage", "Current"
and "Duration" respectively.
Select "Apply" to save EasyArb configuration.
Figure 6-11.
Instrument functions
Advanced functions
on page 49.
50