System Hardware Profile; Troubleshoot The 3300 Universal Nsu - Mitel 3300 ICP Hardware User's Manual

3300 ICP Hardware User Guide
CIM LED State
Off
Flashing
On
Note: Ethernet Port 2 on the 3300-100 Controller does not currently function and should NOT
be used for any purpose.
Normal mode
LED mode switch pressed

System Hardware Profile

To check the hardware that is installed in the controller:
1. Click System Hardware Profile from the Maintenance and Diagnostic menu.
2. Select one of the following:
- Compute Cards for information on the E2T or RTC cards
- Modules for information on the MMC cards (Dual FIMs, Echo Cancellers, DSPs).

Troubleshoot the 3300 Universal NSU

LED
LAN
MS (message system)
238
Copper Interface Module LEDs
Meaning for Local, Upper and Remote, and Lower CIM
No Power
Link established but not configured
Communication Link established and configured
10/100 Base TX MDI-X Ethernet LEDs
LED State
Top - On
Top - On
Bottom - On
Bottom - Off
Top - On
Top - On
Bottom - On
Bottom - Off
Universal NSU Link Status
State
flashing
solid green
off
Release 3.3
Color Meaning
Yellow Link activity
Red Collision
Green Link integrity
No link integrity
Yellow Full Duplex
Red ERR
Green 100 Mbps
10 Mbps
Meaning
LAN activity
message link open to the system
message link not open to the system;
may be downloading when L0 and L1
are "walking"