Capacity - Mitel 3300 ICP Hardware User's Manual

Capacity

The 100-user 3300 ICP will support one of the following maximum configurations:
• 100 IP telephones and 48 ONS telephones with no peripheral unit support.
• a combination of IP, ONS, and DNI telephones (for example, 75 IP telephones, 48 ONS
telephones, and 25 DNI telephones on a peripheral unit).
The 250-user 3300 ICP will support one of the following maximum configurations:
• 250 IP telephones and 96 ONS telephones with no peripheral unit support.
• 250 IP telephones and a 192 port peripheral unit with a DTMF card installed.
• a combination of IP, ONS, and DNI telephones (for example, 100 IP telephones, 96 ONS
telephones, and 100 DNI telephones on a peripheral unit).
A 700 User Controller will support one of the following maximum configurations:
• 700 IP telephones and 96 ONS telephones with no peripheral unit support.
• 700 IP telephones, 96 ONS telephones (connected via ASUs) and three 192 port peripheral
units with a DTMF card installed.
The following table gives the maximum capacities available.
Note: The controller will not support all of these capacities at the same time. Refer to
your Mitel Networks Sales Engineer for specific information on how to configure a 3300
ICP system.
Parameter Name
Compression Channels (for TDM-IP)
DTMF Receivers
E2T Channels
Tone Detector Circuits*
Tone Generators
Voicemail Ports
Dual FIMs
NSUs - without chaining
NSUs - with chaining
Peripheral Unit - direct connection
Peripheral Unit - with extended Per
ASUs
Trunks (analog and digital combined)*
BRI U Interfaces (with NSU)
Hardware Capacity
700 User / 250 User
Controllers
64
128
128
32
128
30
1 (250 User Controller)
2 (700 User Controller)
4
8
4
8
4
628
60
Release 3.3
Installing
100 User
Controller
32
128
64
32
128
30
1
2
4
1
Not Supported
2
628
30
117