Install a Power Distribution Unit (PDU)
To replace a PDU in a Peripheral Unit:
1. Power down the node.
2. Remove the front panels.
3. Remove the PDU.
-
Unplug the external power cord from the PDU.
-
Remove the PDU internal power cover plate.
-
Unplug the PDU internal power cord from the power converter.
-
Remove the outer screws on the PDU faceplate.
-
Pull the PDU out until you can access the fan power connector at the rear of the PDU.
-
Disconnect the fan power connector and remove the PDU.
4. Install a new PDU.
-
Unpack and inspect the new PDU for damage.
-
Set the power switch on the new PDU to off (O).
-
Connect the fan power connector at the rear of the PDU.
-
Insert the PDU and replace the outer screws on the PDU faceplate.
-
Plug the PDU internal power cord into the power converter.
-
Replace the internal power access cover plate.
-
Plug the external power cord into the PDU.
5. Power up the node.
6. Replace the front panels.
Release 3.3
Install Upgrades and FRUs
215