Mitel 3300 ICP Hardware User's Manual page 207

5. Enter the customer's username and password. You see the main ESM tools menu.
6. Click System Administration Tool.
7. Click in the Selection: drop-down menu, where it says [Click here to start].
8. Click Maintenance and Diagnostics, then click Back-up.
9. Read the section, "Trusting the FTP Backup and Restore Applet," and then follow the
instructions to copy the identitydb.obj file to your PC (if required).
10. In the section, "Performing the backup", enter the path on your local drive to store the
backup (for example, C:\3300_ICP\backup).
11. Enter a name for your backup file.
12. Click Yes to include the voice mail messages in your backup.
Note: The upgrade will erase the voice mail messages in your system, so you need to
back them up now. Note that including voice mail messages can significantly increase
the backup time.
13. Click Start Backup. The system displays progress and, eventually, a back-up complete
message.
Note: During a system backup, the 5140 IP Appliance will be unable to access the
following applications through the command keys: Online Services, Personal Directory,
Bookmarks, and Speed Dials.
Timer: The system takes approximately 1/2 an hour to 1 1/2 hours to back up an
average-sized database, and approximately 4 hours to back up a large database.
14. Click OK.
15. Verify the presence of the backup file on the local drive.
16. Use the following procedure to ensure that your ESM backup file contains your voice mail
messages before proceeding with the software installation:
- Change the backup file name to .tar file (for example, May10 to May10.tar)
- Use WinZip to open your renamed .tar file
- Look for files with the name of 002Vxxxxxxx.vox (where xxxxxxx is a variable,
system-generated, alphanumeric string), which are played and unplayed messages,
and 003msgxxxx.vox (where xxxx is the extension number), which contain the status
of messages belonging to that extension.
Installing 3.3 software (upgrading)
17. Insert the Mitel Networks 3300 ICP 3.3 software CD into the CD drive of the installer's PC.
18. Run the "Setup.exe" program from the CD. You see the Installation Wizard Welcome page.
19. Click Next to continue.
20. Read the License Agreement page, and click Yes if you wish to continue.
21. Ensure that New Installation is selected, and click Next.
22. Choose a location in your local FTP server for the InstallSetup program to install files
(normally this is C:\inetpub\ftproot, which is the default FTP home directory for an
anonymous user) by completing either of the following steps:
- Click Browse to find the location, and then click Next to continue. You see a read-only
list of the configurations you have made.
Release 3.3
Install Upgrades and FRUs
199