Checking The Automatic Collimation - AGFA DR 800 User Manual

82 | DR 800 | Introduction

Checking the automatic collimation

1. Move the focal distance to 115 cm.
2. Select the second sensor area and check that the collimator automatically
sets to the selected value (30x30).
3. Vary the focal distance and check that the selected format keeps the right
value.
4. Select the third sensor area and check that the collimator automatically
sets to the selected value (20x20).
5. Vary the focal distance and check that the format remains unchanged even
if the focal distance varies.
6. Select the fourth sensor area and check that the collimator automatically
sets to the selected value (15x15).
7. Vary the focal distance and check that the format remains unchanged even
if the focal distance varies.
0392C EN 20210309 1049