AGFA DR 800 User Manual page 122

122 | DR 800 | Basic Workflow
Table 9: Buttons in the dynamic image screen after stopping the exposure
Button Function
Depending on the configuration, this step is skipped and the screen
returns to the Acquisition window right after stopping the dynamic
exposure.
9. Acquire a static image.
a) Select the static image mode in the software console.
b) Press and hold down the exposure button or the radiography pedal to
10. Perform quality control.
11. If all images in the examination are OK, click Close and Send All.
If configured, the fluo sequences, static images and rapid sequences are
sent to the printer and/or PACS archive. The exam is placed in the Closed
Exams pane.
Depending on the configuration, fluo sequences may not be stored and not
be sent to a PACS archive. This is indicated by the yellow icon in the top
right corner of the fluo sequence thumbnail. To store and archive a
selected fluo sequence, click the Store Sequence button before clicking
Close and Send All.
Related Links
Resetting the fluo timer
0392C EN 20210309 1049
Display the dynamic image in full screen mode for further edit-
ing.
Return to the Acquisition window.
Figure 87: Static image mode
make an exposure to acquire a static image.
The image is stored and displayed as a thumbnail in the lower half of
the Image Overview pane.
Figure 88: Thumbnail of a static image
If required, multiple static images can be made.
on page 203