118 | DR 800 | Basic Workflow
1
2
4
1.
2.
3.
4.
Figure 77: Examination overview
a) Check the X-ray modality settings.
b) Check the exposure settings.
3. Move the X-ray system to the right position.
a) Check if a correct automatic position is selected.
0392C EN 20210309 1049
X-ray modality settings
Generator settings for the static exposure or the rapid sequence
exposure, depending on the mode that is selected in the generator
controls screen of the software console
Generator settings for fluoroscopy
Automatic position
Figure 78: X-ray modality controls on the software console
The fluo group contains settings for fluoroscopy, for static images and
for rapid sequence exposures.
Figure 79: Generator controls for fluoroscopy
Figure 80: Generator controls for static images and for rapid sequence
exposures
3