Flfs Overlay - AGFA DR 800 User Manual

FLFS Overlay

All appropriate policies and procedures should be followed to avoid
contamination of the user/staff, patients and other equipment. All existing
universal precautions should be extended to avoid coming into contact with
patient or close contact with patient or potential contaminations. The user is
responsible for selecting a disinfection procedure.
• If required, wipe the patient contact surfaces of the FLFS overlay using
disinfectants such as ethanol (70%), to prevent the risk of infection.
• Do not spray the equipment directly with disinfectants or detergents.
• Wipe it with a cloth slightly damped with a neutral detergent. Do not use
solvents such as anhydrous or high solvency alcohols, thinner or benzine.
Doing so may damage the surface of the equipment.
• Take care that by using disinfectants, the skin of the user or of the patient
cannot be irritated.
DR 800 | Cleaning and Disinfecting | 89
0392C EN 20210309 1049