Dr Workflow For Dynamic Images - AGFA DR 800 User Manual

DR workflow for dynamic images

This workflow is available only on DR systems that support dynamic imaging.
To acquire a set of fluo sequences, rapid sequences and static images for
diagnosis:
1. Add a dynamic group to the Image Overview pane.
If a dynamic group has already been added based on data from the RIS,
this step can be skipped.
a) In the Examination window, click Add Image.
The Add Image window appears.
Figure 75: Add Image
b) Specify the exam group and exam type by clicking on the buttons.
c) Select an exam type that is configured as a dynamic group and click
OK.
The dynamic group thumbnail is added to the Image Overview pane.
A dynamic group thumbnail is indicated with an icon in the top right
corner of the thumbnail.
Figure 76: Thumbnail for a dynamic group
2. Select the thumbnail for the dynamic group in the Image Overview pane
of the Acquisition window.
The selected DR detector is activated. The default X-ray exposure
parameters and X-ray system position for the selected examination are
sent to the modality. The software console displays these settings in the
examination overview.
DR 800 | Basic Workflow | 117
0392C EN 20210309 1049