Fluo Timer - AGFA DR 800 User Manual

202 | DR 800 | Software Console

Fluo timer

The fluo timer displays the total duration up till now of all fluoroscopy
sequences in this examination.
Figure 153: Fluo timer
To prevent excessive fluoroscopy time, an alarm time and a maximum
duration time can be configured.
When the alarm time is reached, a sound signal is heard and the fluo timer is
blinking orange.
When the maximum duration time is reached, the fluoroscopy sequence is
stopped.
There can be a difference of a few seconds between the value of the fluo timer
in the software console and the value of the total duration of all dynamic
images in the NX software.
0392C EN 20210309 1049