Attention To Overhead Loads - AGFA DR 800 User Manual

Attention to overhead loads

The X-ray tube ceiling suspension is designed to support and move overhead
devices. This system may be in use with other overhead or protruding devices,
that can be either mobile or fixed, and can present hazards to both the
patients and the operators that are located within the examination room. Pay
attention to where these devices are located to avoid coming into accidental
contact with them. Always control the movements of the patient while in the
working area to protect them and prevent their contact with the equipment.
This mobile equipment is designed to carry overhead loads: the
patient or operator should remain in the equipments vicinity on-
ly for the time necessary to perform examinations or to service
the equipment.
Take care of where the suspension unit may be parked to avoid
accidental contact with the overhead mass.
DR 800 | Safety Directions | 103
0392C EN 20210309 1049