Mounting The Patient Footrest - AGFA DR 800 User Manual

242 | DR 800 | Options and accessories

Mounting the patient footrest

When examinations are to be executed with the table in the vertical position,
the patient support footrest can be used as a base support to keep the patient
in the standing position or seated.
The footrest can be mounted either on the right end (normally the foot side)
or the left end (normally the head side) of the tabletop.
1. Place the table in the horizontal position.
2. Hold the footrest so that its guides are perfectly aligned with the guides of
the tabletop.
3. Insert the footrest in the guides.
1.
4. Turn and press the knobs on both sides to release the locks.
5. Make the footrest slide by keeping the knobs pressed until the footrest is
almost completely inserted in the guides.
1.
2.
3.
6. Release the knobs and make the footrest slide some cm more until you can
3
hear the click of the locking device of the footrest.
3
3
0392C EN 20210309 1049
1
1
1
Footrest guides
1
1
3
1
3
2
1
2
3
2
Footrest guides
1
Turning the knob
Pressing the knob
1
2
1
2
2
1
1