To Stitch A Set Of Partial Images - AGFA DR 800 User Manual

To stitch a set of partial images

To stitch a set of partial images:
1. In NX, go to the Examination window.
2. In the Image Overview pane, select the thumbnail of one of the partial
images.
3. Click Stitch Images.
The Stitching pane is displayed.
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical
information in the image.
The area of the image where two partial images are stitched together is
indicated by the stitching tools displayed on the right side of the image. In
this area, the two partial images slightly overlap. If the anatomical
structures in the overlapping area are not aligned, stitching can be
adjusted manually.
DR 800 | Full Leg Full Spine | 177
0392C EN 20210309 1049