AGFA DR 800 User Manual page 114

114 | DR 800 | Basic Workflow
b) Release the fluoroscopy pedal to stop the fluoroscopy sequence.
If required, multiple fluo sequences can be made.
5. After stopping a dynamic exposure, the dynamic image screen remains
visible and the acquired sequence is played continuously.
Table 7: Buttons in the dynamic image screen after stopping the exposure
Button Function
Depending on the configuration, this step is skipped and the screen
returns to the Acquisition window right after stopping the exposure.
6. Make the exposure.
Use the exposure button or the radiography pedal to make the planned
exposure.
0392C EN 20210309 1049
Warning sign for delay on real-time imaging
4.
Figure 70: Dynamic image screen
A warning sign can be displayed if the real-time imaging is not
guaranteed.
The fluo timer displays the total duration up till now of all fluoroscopy
sequences in this examination. When the alarm time is reached, a
sound signal is heard. When the maximum duration time is reached,
the fluoroscopy sequence is stopped.
Figure 71: Fluo timer
The fluo sequence is stored and displayed as a fluo sequence
thumbnail in the lower half of the Image Overview pane. The last
image of the sequence is visible in the thumbnail.
A fluo sequence thumbnail is indicated with a transparant Play icon in
the center.
Figure 72: Thumbnail of a fluo sequence
Display the dynamic image in full screen mode for further edit-
ing.
Return to the Acquisition window.