AGFA DR 800 User Manual page 121

A fluo sequence thumbnail is indicated with a transparant Play icon in
the center.
Figure 84: Thumbnail of a fluo sequence
7. Acquire a rapid sequence.
a) Select the rapid sequence mode in the software console.
Figure 85: Rapid sequence mode
b) Press and hold down the exposure button or the radiography pedal to
make a rapid sequence exposure.
c) Release the exposure button or the radiography pedal to stop the rapid
sequence.
The rapid sequence is stored and displayed as a rapid sequence
thumbnail in the lower half of the Image Overview pane. The last
image of the sequence is visible in the thumbnail.
A rapid sequence thumbnail is indicated with a white Play icon in the
center.
Figure 86: Thumbnail of a rapid sequence
8. After stopping a dynamic exposure, the dynamic image screen remains
visible and the acquired sequence is played continuously.
WARNING:
In exceptional occasions the last image of a rapid
sequence may not be of appropriate quality due to an
uncompleted exposure. In this case the user can choose
to keep or or disregard this image on the NX workstation
and use the second last image instead.
DR 800 | Basic Workflow | 121
0392C EN 20210309 1049