Mounting The Patient Footrest As A Seat - AGFA DR 800 User Manual

244 | DR 800 | Options and accessories

Mounting the patient footrest as a seat

The footrest can also be fastened in a more advanced position compared with
the center of the tabletop. Normally this position is used when the operator
wishes to seat the patient on the footrest.
1. Turn and press the knobs on both sides to release the locks.
2. Push the footrest some centimetres onwards.
3. Release the knobs and make the footrest slide some cm more until you can
hear the click of the locking device of the footrest.
4. Make sure that the footrest is firmly secured to the guides by bearing down
and pressing on the longitudinal direction onwards and backwards.
0392C EN 20210309 1049