CR 30-X
Preventive Maintenance and
Troubleshooting
Checking the Image Quality
The only maintenance action which you must perform is checking the image
quality. Refer to the User Manual of the NX Software.
Troubleshooting Checklist
The troubleshooting for a malfunction of the CR 30-X consists of two parts:
•
The first is always to check the status indicator on the CR 30-X.
•
Other errors need more detailed information and instructions to repair the
malfunction, or they can only be fixed by a Service engineer. In this case,
consult the ASAP UI (Agfa Service Access Package User Interface)
messages on the control PC.
General Errors
Error
The CR 30-X does
not start up.
40
Operating CR 30-X
Check the power supply. If the power supply is ok, call your
local Service engineer.
Action
2386B EN 20060926