Basic Workflow - AGFA CR 30-X User Manual

Basic Workflow

The main functions of the CR 30-X System are digitizing image plates and
transmitting the digital image data to the image processing station, where you
can perform an image quality control.
The workflow consists of the following successive steps:
"
Step 1: Select a patient and start the
"
Step 2: Digitize the
"
Step 3: Perform a quality
"
Step 4: Remove the cassette and insert the next
Step 1: Select a patient and start the exam
At the NX Station:
1
Open the Worklist window of NX.
In the Worklist window, you can view and manage the exams that are scheduled via
the Worklist pane.
Note: When starting the NX Software, the Worklist window is the first
window that appears after the NX Splash screen.
Note: ... Start the NX Software on the NX Station.
Refer to the NX User Manual, document 4420.
2385A EN 20060630
exam.
image.
control.
one.
Getting Started with the CR 30-X System
CR 30-X S
YSTEM
13