Table of Contents
Advertisement
T3SP-Series Operator's Manual
2.5.1.2 Sample List
Basically the Sample List is collection of Samples as described in subsec-
tion 2.5.1.1. The following is a list of the table columns as shown in Fig. 1:
Sample Name: Measurement label, which must be a non-empty string. A
new sample can be generated by filling in this field. Special characters should
be avoided.
Description: Field for storing some additional information for each sample
(not mandatory)
Channel: Indicates the selected channel(s) for the sample. Not directly ed-
itable.
Result: Indicates overall result for the measurement, content depends on
measurement mode. Not available in all modes and not directly editable.
2.5.1.3 Macro List
The Macro List is suitable for performing recurring series measurements.
Macros can be defined similar to Samples. When working in macro mode
(see toolbar ), the listed macros are cyclically used as template for a new
measurements. The measurements are automatically labeled according to
the macro name and pushed in to the Sample List for further use.
14
931776 RevE
Advertisement
Table of Contents
