Teledyne T3SP Series Operator's Manual page 16

T3SP-Series Operator's Manual
trace(s). This can be activated via the menu entry View Display averaged
Measurement.
Please note: in the Seunis.config file a maximum number of averages can be
set ( Compressed number of measurements , default: 50 ). If the selected
number of averages exceeds this number, the number of stored repetition measure-
ments is automatically compressed to this value without affecting the accuracy.
TDR and Impedance View
The view can be switched to real-time impedance trace (menu View Show
Impedance). The impedance trace represents the uncorrected impedance
(without TTC, see chap. 4). The traces of the currently selected sample in
the sample list are not shown if impedance is turned on.
The live traces can be switched on/off via the Channel buttons. A linear inter-
polation between the points can be activated via View Interpolate Trace.
The background color can be changed via the View Change Background
Color menu entry.
Zooming & Moving
Zooming functions are available via Position, Zoom & Fit buttons. The zoom
can be changed via the mouse (use mouse-wheel or hold left mouse button
pressed down while dragging). A "fit-to-screen" is applied by a double right-
click in the diagram. The TDR trace can be positioned by holding the middle
button down while moving the mouse.
Memory Function
It is possible to display a previously acquired TDR trace on the screen by
pressing the CTRL button and clicking the Show Mem button simultaneously.
Either the live curve or a sample (average of all repetition measurements)
16
931776 RevE