T3Sp-Dprobe - Teledyne T3SP Series Operator's Manual

13.2 T3SP-DPROBE

Parameter
Impedance
Electrical Length
Probe Tips
Pitch
Pin Confi guration
Connectors
Frequency Range
Dimensions
Material
Specials
Parameter
The T3SP-DPROBE combines flexible pitch adjustment and extraordinary high fre-
Impedance
quency performance up to 18GHz. To obtain optimal results, please execute the
Electrical Length
following steps for adjusting the probe pitch:
Probe Tips
Pitch
Pin Confi guration
Connectors
Frequency Range
Dimensions
Material
Parameter
Impedance
Electrical Length
Probe Tips
Pitch
Pin Confi guration
Especially step 3 is of great importance for reliable high frequency measurements.
Connectors
The adhesive copper foil is available from Teledyne LeCroy probe accessories kits. If
Frequency Range
no foil is available, alternatively a conductive wire may be used, too.
Dimensions
Material
Parameter
Impedance
Electrical Length
Probe Tips
Value / Unit
100 Ω
690 ps
Fixed Blades
0.1 – 5 mm
Signal – Signal
SMA female
DC – 18 GHz
130 × 34 × 14 mm
157.5 × 34 × 14 mm
Aluminum
Value / Unit
100 Ω
830 ps
Spring-loaded pin
2.54 mm
Signal – Signal
SMA female
DC – 5 GHz
131 × 32 × 13.2 mm
131 × 32 × 15.6 mm
Polystyrene
Value / Unit
50 Ω ±1 Ω
850 ps
spring-loaded
2.54 mm
S-G
SMA female
DC – 5 GHz
131 x 32 x 13.2 mm
131 x 32 x 15.6 mm
Polystyrene
Value / Unit
50 Ω ±1 Ω
100 ps
spring loaded
T3SP-Series Operator's Manual
Comments
VSWR < 1.05
Copper beryllium (3 pairs of
replacement tips included)
adjustable
compatible with 2.92 mm
and 3.5 mm connectors
valid for probe without tips
casing only
with connectors and tips
direct in-circuit TDR testing
Comments
VSWR < 1.05
fi xed
compatible with 2.92 mm
and 3.5 mm connectors
valid for probe without tips
casing only
with connectors and tips
Comments
fi xed
compatible with 2.92 mm
and 3.5 mm connectors
valid for probe with tips
casing only
with connectors and tips
Comments
89
931776 RevE