Teledyne T3SP Series Operator's Manual page 50

General information can be passed to identify the measurements for later
use. Some details are necessary for a realistic characterization of the mea-
surement objects.
Remark: the software displays the x-axis of the impedance trace vs. the traveling
time t[ns] or versus a spatial resolution L[cm]. The software needs some of the in-
formation (explicitly the velocity or alternatively line-type and geometry) to convert
the traveling-time into spatial information. Furthermore the reference plane can be
set to the TDR probe tip, by performing a reference measurement (F6 or Extras
Reference Measurement).
•
The General Information group holds information about the objects
under test and about the user. The information is used for creating
impedance reports and is stored in Project Files.
1. In the Customer field information can be stored for each sample.
2. The labeling of the next three fields (by default Part Descr., Part
No., Batch No.) can be customized in the Seunis.config (see 2.2)
file by customizing the lines
can be made for each installed language separately.
3. The User ID is a permanent setting and cannot be altered here.
Changes must be made in the Options Dialog (see section 2.5.4,
click menu Extras
4. The fields Measurement Mode and Channel are purely informa-
tive and cannot be changed here.
•
In the Material / Line specification group some useful information
about the measurement object can be handled:
The Material field is purely informative.
T3SP-Series Operator's Manual
LabReplace SetWin(...)
Options).
. Changes
50
931776 RevE