Teledyne T3SP Series Operator's Manual page 58

Figure 9: Magnitude of S
•
Right-click an existing sample and select S
case the S
XY
further information.
•
A 12TC calibration must be activated for measuring S
indicated by three green LEDs in the Main Window.
•
Most of the functionality and handling is similar to the S
ments (display, result domains, masks, smoothing, data export, etc.),
please refer to section
•
Switching between the different S
the menu item View
pressing the hotkey combination CTRL-ALT-F9/F10.
•
A special function to reduce asymmetry effects of the non-ideal mea-
surement system is to equalize the S
can be activated by checking the Equalize transmission coefficients in
F2P box in the Advanced tab in the Options Dialog (see section 2.5.4).
Please note: currently there is no live mode available in Quick Operation Mode.
mode is not available, please
5.2 for further information on these topics.
S-Parameters
T3SP-Series Operator's Manual
- and S -parameters
11 21
measurement mode. In
XY
Teledyne LeCroy support
-parameters can be achieved via
XY
Select Parameter
/S -parameters. This option
12 21
for
-Parameters,
XY
-measure-
11
S or by
XY
58
931776 RevE