Australia & New Zealand Declaration Of Con; Formity - Emc - Teledyne T3SP Series Operator's Manual

To ensure compliance with all applicable EMC standards, use high-quality shielded inter-
1
face cables.
Emissions which exceed the levels required by this standard may occur when the instru-
2
ment is connected to a test object.
This product is intended for use in nonresidential areas only. Use in residential areas
3
may cause electromagnetic interference.
Meets Performance Criteria "B" limits of the respective standard: during the distur-
4
bance, product undergoes a temporary degradation or loss of function or performance
which is self-recoverable.
Performance Criteria "C" applied for 70%/25 cycle voltage dips and for 0%/250 cycle
5
voltage interruption test levels per EN61000-4-11.
European Contact:*
Teledyne GmbH, European Division
Im Breitspiel 11c
D-69126 Heidelberg, Germany
Tel: +49 6221 82700
17.1.2 AUSTRALIA & NEW ZEALAND DECLARATION OF
CONFORMITY – EMC
The instrument complies with the EMC provision of the Radio Communications Act per the
following standards, in accordance with requirements imposed by Australian Communica-
tion and Media Authority (ACMA):
AS/NZS CISPR 11:2015 Radiated and Conducted Emissions, Group 1, Class A.
Australia / New Zealand Contacts:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067
* Visit teledynelecroy.com/support/contact
T3SP-Series Operator's Manual
RS Components Ltd.
Units 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
for the latest contact information.
99
931776 RevE