Table of Contents
Advertisement
1.
Make sure the S-parameters for all multiplexer channels are available
as Touchstone s2p files.
Remark: If the parameters are unavailable, it is possible to create them as
described in section 7.3.
2.
Perform the TTC/12TC-calibration according to chapter
of the cables to be connected to the multiplexer. At the end of the
wizard, the user is informed that the calibration just performed is now
applied to all channels, as described in section 11.2, no.
3.
Connect the TDR to the multiplexer via coaxial cable(s).
4.
Open the De-Embedding Dialog via the tool button
Window and select all corresponding Touchstone files for the individ-
ual channels.
5.
Close the dialog with OK and save your work to a
de-embedding tool button
T3SP-Series Operator's Manual
should have turned green meanwhile.
4
at the end
3.a.
in the Main
mas Project File. The
931776 RevE
76
Advertisement
Table of Contents
