Teledyne T3SP Series Operator's Manual page 23

Set x/y-Mask in ...
Change Frequency
Set optimized Frequency
Change Video Bandwidth Change current video bandwidth.
Set Reference manually
Live
Change the tolerance mask x- and y-limits to current
axis for all displayed traces.
Change frequency settings.
Set optimized frequency setting for exporting
de-embedding parameters.
Change reference position (point in time to be
indicated in [nsec]) to a user-defined value. Make
sure the current reference measurement is not empty
(see section 5.1.2).
Enable & disable live trace (only available in Quick
Operation Mode, not for full 2-port mode).
T3SP-Series Operator's Manual
23
931776 RevE