Safety Symbols & Terms; Safety Requirements - Teledyne T3SP Series Operator's Manual

15.3 Safety Symbols & Terms
Where the following symbols or terms appear on the instrument front or
rear panels, or in this manual, they alert you to important safety considera-
tions.

15.4 Safety Requirements

This safety instruction section contains information and warnings that must
be observed to keep the Teledyne LeCroy T3SP High Differential Time Do-
main Reflectometers (T3SP15D & T3SP10D) operating in a correct and safe
condition. You are required to follow generally accepted safety procedures
in addition to the safety precautions specified in this section.
a. USE PROPER CORD:
Use only the power supply and power cord shipped with this instru-
ment and certified for your country.
This symbol is used where ESD-precautions are re-
quired. This is especially true if the fully integrated
ESD-protection is disabled (e.g. during a measure-
ment).
This symbol is used to denote a safety ground con-
nection.
Power On / Standby (Off).
T3SP-Series Operator's Manual
95
931776 RevE