Additional Remarks On De-Embedding - Teledyne T3SP Series Operator's Manual

1. Perform a full 2-port calibration (12TC)
2. Set the number of averages to a high number (>1000)
3. Activate frequency domain smoothing (see chapter 6)
4. Activate equalization of transmission coefficiants (see section 5.3)
5. Create a Sample and set the measurement mode to full 2-port
6. Measure the fixture
7. Adjust the frequency axis in the Result Visualization Window by using
the menu item Extras
accept the suggested frequency setting.
8. Export the data to a Touchstone s2p file by using the
Result Visualization Window.

7.4 Additional Remarks on De-Embedding

•
De-embedding is an advanced functionality and requires some experi-
ence. It is recommended to critically evaluate the results and improve
the de-embedding parameters if necessary.
•
De-embedding can be applied in time-domain measurement modes.
In this case the reflection of the DUT is shifted to the left on the time-
axis. The fixture removed by the de-embedding algorithm seems to
"disappear".
T3SP-Series Operator's Manual
Set optimized Frequency for De-Embedding,
tool in the
64
931776 RevE