each indivdual Sample:
•
Sample name (must be defined on creation of sample)
•
Description (some further piece of information, optional)
•
Channel assignment
•
Results of measurement (depends on measurement mode)
•
Measurement mode (see chapter 5)
•
TDR traces (see Figure 2)
•
Time base settings
•
Frequency setting
•
Tolerance mask
•
Part description and number, batch number, customer info
•
Test standard (freely selectable description, e.g. IEC 61196)
•
Meta and system diagnostic data
To create a new Sample, simply type a new name in the first empty line of
the Sample List. On creation, only the name has to be defined, all other
parameters are defined according to the current system settings (e.g. time
base, frequency, measurement mode, test standard).
With very few exceptions, the settings can also be made or changed later.
How to change the settings for a single or multiple Samples is explained
later in the course of this manual. To get an overview of the settings to
be changed, right-click an existing Sample in the list and select the Change
Samples Settings menu item or open the Impedance Measurement Proper-
ties Window, as described in section 5.1.3.
T3SP-Series Operator's Manual
13
931776 RevE