T3SP-Series Operator's Manual
is chosen and all samples with different measurement modes are ignored. However
single-ended and differential measurements in similar modes can be exported into
the same PDF.
8.2 CSV-Export Module
For this export module two different modes are available. If the sample list
only contains TDR/DTDR measurements, a summary table similar to the
PDF-export is generated. In all other cases, only a summary of the mea-
surements similar to the sample list including some additional information
is created.
Please note: the CSV delimiter can be changed in the Seunis.config (see section 2.2).
8.3 Touchstone-Export
S-parameter data can be exported to the Touchstone format. Each selected
sample is exported into an individual file. The frequency data points are ex-
ported in MHz, the scattering parameter values as magnitudes and degrees.
Please use the Export button in the Result Visualization Window.
8.4 Matlab-Export
TDR and S-parameter data can be exported to Matlab files by pressing the
Export button in the Result Visualization Window.
67
931776 RevE