Test Mode Overview - Fujitsu FI-4860C2 Operator's Manual

7.4 Test Mode Overview

■ Outline
Scanner operation can be checked in the offline test mode.
To enter the test mode, follow the procedures below.
- Test mode
Keep pressing
Then the Operator panel LCD displays the following message.
Press (Left arrow button) or
By pressing
To end the test mode, turn off the power.
HINT
(Start button) and turn on the power.
< M O
S E
(Right arrow button) and select [TEST].
(Enter button), the scanner enters test mode.
The blinking item is the one selected.
D E S E L E
T U P T E

7.4 Test Mode Overview

C T >
S T
7-67
7