Phs-Picture-In-Picture Horizontal Size; Pif-Projector Information - Christie GS Series Technical Reference

Command
Examples
Replace the default PIN number with a new PIN:
(PCG "12345,78564)
PHS–Picture-in-Picture Horizontal Size
Sets the size (width) of the picture-in-picture window.
The active portion of the input signal, as determined by blanking controls, is scaled to fit into the
picture-in-picture window.
Commands
Command Description
PHS <value> Sets the picture-in-picture size.
Examples
Set the picture-in-picture size to large:
(PHS 2)
PIF–Projector Information
Displays information about the projector.
This command is only available when the projector is in service mode and is read only.
Commands
Command Description
PIF+MDLN? Returns the model name.
PIF+SNUM? Returns the serial number.
PIF+NERS? Returns the native resolution.
PIF+FWVS? Returns the firmware version.
PIF+CFVS? Returns configuration information.
PIF+BCVS? Returns the boot code.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Description
• NNNNN = New PIN
Serial API commands
Values
Values
0 = Small
1 = Medium
2 = Large
Values
—
—
—
—
—
—
45