Installing The Ceiling Mount; Leveling The Projector - Christie 4K10-HS Installation And Setup Manual

Installing the ceiling mount

Mount the projector with a Christie-approved mount or rigging frame (such as the Christie One
Mount Plus, P/N: 140-117100-XX, and Christie One Aluminum Rigging Frame, P/N: 140-137102-XX),
using the four mounting points on the underside of the projector.
Warning
! If not avoided, the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
Refer to the installation instructions and safety guidelines provided in the kit (such as the Christie
One Mount Plus, P/N: 140-117100-XX, and Christie One Aluminum Rigging Frame, P/N: 140-137102-
XX).

Leveling the projector

To adjust the vertical position of the projector, turn in or out of the adjustable feet on the bottom of
the projector.
4K7-HS/4K10-HS Installation and Setup Guide
020-001449-02 Rev. 1 (06-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Installation and setup
21