Installing The Cable Cover; Installing The Ceiling Mount - Christie GS Series Manual

Notice. For ultra short throw lens installation information, refer to the Ultra short throw lens
installation instruction sheet (P/N: 020-102569-XX).

Installing the cable cover

1. Rotate the cable cover and insert the two guide pins into the guide holes.
2. Press and hold both lower corners of the cable cover while inserting the sheet clips into the
projector casing.

Installing the ceiling mount

Mount the projector with a Christie-approved mount, using the four mounting points on the
underside of the projector.
See List of components
1. Refer to the installation instructions and safety guidelines provided in the kit.
See List of components
DWU6322-GS/DWU7062-GS User Manual
020-001792-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 70.
on page 70.
Guide Pin
Guide Hole
Hold and Press Here
Installation
29