Positioning The Display; Installing The Ceiling Mount - Christie Inspire 4K Series Installation And Setup Manual

Table of Contents

Advertisement

Positioning the display

When you select a position for the projector, consider the size and shape of your screen, the
location of your power outlets, and the distance between the projector and the rest of your
equipment. Follow these general guidelines:
Position the projector on a flat surface at a right angle to the screen. The projector (with the
standard lens) must be at least 1.33 m (4.3 feet) from the projection screen.
Position the projector to the required distance from the screen. The distance from the lens of
the projector to the screen, the zoom setting, and the video format determine the size of the
projected image.
Determine the lens throw ratio.
For more information detailing the throw ratio for each lens, refer to the Inspire Series Lens
Throw Ratios Technical Reference (P/N: 020-103497-XX).
360 degree free orientation operation
When installing the projector in portrait orientation, Christie recommends the built in keypad and
power inputs face upwards. This allows access to the built in keypad and power connections during
operation.

Installing the ceiling mount

The projector can be inverted and suspended from the ceiling using a specially designed ceiling
mount fixture (Christie One Mount P/N: 108-506102-XX). For more information, contact your dealer.
Warning! If not avoided, the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• Keep at least 15 mm (0.6 inches) gap between the ceiling mount and the bottom intake vents of the projector.
• Avoid installing the projector near a heat source.
Caution! If not avoided, the following could result in minor or moderate injury.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
• Refer to the installation instructions and safety guidelines provided in the kit
(such as Christie One Mount, P/N: 108-506102-XX).
• Damage resulting from incorrect installation voids the warranty.
1. To prevent damage to your projector, use the Christie-recommended ceiling mount.
Inspire Series Installation and Setup Guide
020-002097-01 Rev. 1 (11-2023)
Copyright ©2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

4k860-is

Table of Contents