Installing The Ceiling Mount - Christie Inspire Series Installation And Setup Manual

Installing the ceiling mount

The projector can be inverted and suspended from the ceiling using a specially designed ceiling
mount fixture (Christie One Mount 108-506102-XX). For more information, contact your dealer.
Warning! If not avoided, the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• Keep at least 15 mm (0.6 inch) gap between the ceiling mount and the bottom intake vents of the projector.
• Avoid installing the projector near a heat source.
Caution! If not avoided, the following could result in minor or moderate injury.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
• Refer to the installation instructions and safety guidelines provided in the kit
(such as Christie One Mount, P/N: 108-506102-XX).
• Damage resulting from incorrect installation voids the warranty.
1. To prevent damage to your projector, use the Christie-recommended ceiling mount.
2. To use a third party ceiling mount kit, ensure the screws used to attach a mount to the
projector meet the following specifications:
• Screw type: 40 mm for Christie One Mount 108-506102-XX
Inspire Series Installation and Setup Guide
020-001933-01 Rev. 1 (10-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Lens
486.00(WITH ID RIB)
M4(4X)
480.00
240.00
Unit: mm
85.00
170.00
Installation and setup
21