Dsh-Digital Horizontal Shift; Dsv-Digital Vertical Shift; Dtl-Detail - Christie GS Series Technical Reference

DSH–Digital Horizontal Shift
Moves the projector image left or right. If the image is not zoomed out (Digital Zoom), this command
is disabled.
Commands
Command Description
DSH <value> Moves the projector to the left or
right.
Examples
Center the display area horizontally:
(DSH 50)
DSV–Digital Vertical Shift
Moves the projector image up or down. If the image is not zoomed out (Digital Zoom), this command
is disabled.
Commands
Command Description
DSV <value> Moves the projector to the up or
down. (Write-only)
Examples
Center the display area vertically:
(DSV 50)
DTL–Detail
Applies a predefined sharpness setting to the current input signal.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Values
0 to 100
0 = Moves the display area to the extreme left
50 = Centers the display area horizontally (Default)
100 = Moves the display area to the extreme right
Values
0 to 100
0 = Moves the display area to the top
50 = Centers the display area vertically (Default)
100 = Moves the display area to the bottom
Serial API commands
23