Dsv-Digital Vertical Shift; Dtl-Detail; Dzh-Digital Horizontal Zoom - Christie DWU1612-HS Technical Reference

DSV–Digital Vertical Shift
Moves the projector image up or down. If the image is not zoomed out (Digital Zoom), this command
is disabled.
Commands
Command Description
DSV <value> Moves the projector to the up or
down.
Examples
Center the display area vertically:
(DSV 50)
DTL–Detail
Selects the edge clarity of the image.
Commands
Command Description
DTL <value> Selects the edge clarity of the image.
Examples
Set the edge clarity of the image to high:
(DTL 1)
DZH–Digital Horizontal Zoom
Changes the size of the horizontal display area.
If the display area has been resized with this setting, use the DSH–Digital Horizontal Shift and DSV–
Digital Vertical Shift commands to readjust the image.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Values
0 to 100
0 = Moves the display area to the top
50 = Centers the display area vertically (Default)
100 = Moves the display area to the bottom
Values
0 = Maximum
1 = High
2 = Normal (Default)
3 = Low
4 = Minimum
Serial API commands
25