Calibration Coefficient - Fuji Electric ZPA Service Manual

3) Calibration coefficient

Function: Displays calibration coefficient.
Operation: The coefficient initial screen is as shown at right.
R1 and R2 represent range 1 and 2.
Zero calibration coefficient is displayed on the left side of
screen, and span calibration coefficient is displayed on the
right side.
How to change numeric value;
Select a desired item using the
ENT
Press the key to enter the screen of the item selected.
Move the cursor in front of the value to be changed using
the , or
the value is highlighted.
Change the numeric value and move the digits using the
, or
ENT
pressing the
contents, press the
TN5A1191-E
and
key and then press the
key. Establish the setting contents by
key. If you don't want to establish the
ESC
key.
Factory mode initial screen
The cursor is in 14.
keys.
ENT
key, and
ENT ESC
ENT ESC
23