Table of Contents
Advertisement
2. CHECKING DELIVERED ITEMS
Upon receiving the recorder unit, check if the correct quantity of the accessories are supplied.
Separately supplied document are given first priority. When you have purchased or want to purchase spare
parts for 1-year operation or a list of calibration/installation fixtures, refer to "APPENDIX 2"at the end of
this Manual.
Table 2－1 Products
No.
Product name
1.
Control unit
2.
Receiver box
3.
Transmitter box
4.
Angle adjustment unit
Cable between receiver unit and
5.
control unit
Cable between receiver unit and
6.
transmitter unit
*1: When the 9th code is "B", 16 pieces are provided. For other cases, 8 pieces are provided. The length of
the bolts are 55 mm when the 9th code is "A", and 70 mm when the 9th code is "B", "C", or "D".
Inch-sized bolts are not provided.
*2: The bolts may be delivered being attached to the angle adjustment unit.
Table 2－2 Standard accessories
Quantity
No.
1
1.
Bolt (*1)
1
2.
Nut (*1)
1
3.
Spring washer (*1)
2
4.
Flat washer (*1)
Companion flange packing or flange
1
5.
packing specified for use in high
temperature
1
6.
Bolt for angle fine adjustment (*2)
7.
Power supply fuse (250 V AC/T1A)
8.
Instruction manual
Bolt for connecting the receiving unit
9.
and the transmitter unit
Ferrite core (for power cable, outside
10.
the transmitter case)
Ferrite core (for power cable, inside
11.
the transmitter case)
- 2 -
Product name
Quantity
8 (16)
8 (16)
8 (16)
8 (16)
2
6
2
1
12
1
1
INZ-TN8ZSS-E
Advertisement
Table of Contents
