Table of Contents
Advertisement
Parameter Setting
Path lengths
Average Period
Reset Avg.Gas
Key Lock
Disp.Off
Date/Time
Parameter Setting
Path lengths
Average Period
Reset Avg.Gas
Key Lock
Disp.Off
Date/Time
6.5.2 Setting of moving average time
When the indication value and output value are set to the average value in the "6.6.1 Setting of instantane-
ous/average value", set how many minutes the value should be held as a moving average value.
Setting range is from 1 to 60 minutes. When it is less than the moving average time, output the moving av-
erage value during that period.
Change the setting to reset the average value. (The value is reset when pressing the
Averaging operation
When the moving average time is set to 60 minutes
0
Sampling cycle is once every 1 second.
After reset, output the average value for 60 minutes. Therefore, it takes 60 minutes to obtain the average
value which has been set.
INZ-TN1ZSS-E
(
)
2007-4-1
12:00:00
0
1000
mm
Min.
01
HC ℓ
OFF
ON
09
Min.
07 ／ 01 ／ 01
00:00:00
(
)
NT
2007-4-1
12:00:00
00500
mm
Min.
01
HC ℓ
OFF
ON
09
Min.
07 ／ 01 ／ 01
00:00:00
Reset
60min
- 49 -
Change the numeric value by the
the
key, and move the digits by the
key. Press the
NT
key to validate the set input
value.
Average value
time
Output
key or
key.)
NT
Advertisement
Table of Contents
