Access RAD ASMi-54 Installation And Operation Manual page 76

Chapter 4 Configuration
Main Menu > Configuration > Applications > QoS > Priority
Mapping (DSCP)
1. Tag Value 0 > (Traffic Class 0)
2. Tag Value 1 > (Traffic Class 0)
3. Tag Value 2 > (Traffic Class 0)
4. Tag Value 3 > (Traffic Class 0)
.
.
64. Tag Value 63 > (Traffic Class 0)
A – add; R – Remove ; C - copy
ESC-Previous menu; !-Main menu; &-Exit
Assigning Priorities to Traffic Queues Per Bridge Port
To assign priorities to traffic queues per bridge port:
1. Select Main Menu>Configuration>Applications>QoS>Priority Classification.
2. Select Per Port as the desired traffic classification method.
3. Select Main Menu>Applications>QoS.
4. Select Priority Mapping.
5. Select the desired bridge port.
6. Select Traffic Class and enter the traffic queue number (0–3) to be assigned
7. Repeat the above step for all active bridge ports.
8. Press <S> to save the changes.
Main Menu > Configuration > Applications > QoS > Priority
Mapping (Per Port)
Bridge Port 1
1. Traffic Class
F – Forwards; B – Backwards; C - copy
ESC-Previous menu; !-Main menu; &-Exit
4-26 Configuring for Operation
Figure 4-29. Priority Mapping Screen (DSCP)
The QoS Priority Classification screen appears (see
The QoS screen appears (see
The Priority Mapping (Per Port) screen appears (see
to the bridge port. Each traffic queue can be assigned to more than one port.
Figure 4-30. Priority Mapping Screen (Per Port)
Installation and Operation Manual
ASMi-54
Figure 4-26
).
ASMi-54
> (1)
> (Traffic Class 0)
Figure 4-27
).
Figure 4-30
).
ASMi-54 Ver. 1.0