Tracing The Route; Technical Support - Access RAD ASMi-54 Installation And Operation Manual

Chapter 6 Diagnostics and Troubleshooting

Tracing the Route

This diagnostic utility traces the route through the network from ASMi-54 to the
destination host.
To trace a route:
1. Select Main Menu>Diagnostics.
2. Select Trace Route.
3. Select Destination address and enter the IP address of the host to which
4. Select Display Trace Route to start tracing.
5. Select Stop Trace Route to stop the tracing.
Main Menu > Diagnostics > Trace Route
1. Destination address
2. Display Trace Route
3. Stop Trace Route
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
6.6
Technical support for this product can be obtained from the local distributor from
whom it was purchased.
For further information, please contact the RAD distributor nearest you or one of
RAD's offices worldwide. This information can be found at www.rad.com. (Offices
– About RAD > Worldwide Offices; Distributors – Where to Buy > End Users)
6-24

Technical Support

The Diagnostics menu appears (see
The Trace Route menu appears (see
you intend to trace the route.
ASMi-54 starts tracing the route, displaying the IP addresses of all hop
nodes.
Figure 6-26. Trace Route Menu
Technical Support
Installation and Operation Manual
Figure 6-24
).
Figure 6-26
).
ASMi-54
...(0.0.0.0)
ASMi-54 Ver. 1.0