Access RAD ASMi-54 Installation And Operation Manual page 30

Chapter 1 Introduction
Timing
Diagnostics
Statistics and
Performance
Monitoring
Indicators
PWR (green)
(Front Panel)
TST (yellow)
SHDSL SYNC
(green/red)
ALM (red)
Indicators
Ethernet Ports
(Rear Panel)
(one or four)
LINK/ACT
(green/yellow)
Power Source
AC/DC Voltage
Power
Consumption
1-14 Technical Specifications
Derived from alternative sources:
• Internal oscillator (only CO unit)
• Receive, derived from the SHDSL received signal
(only CPE unit)
SHDSL performance
On: ASMi-54 is powered on
Off: ASMi-54 is off
On: A test is active
Off: A test is inactive
Green: at least one PME is synchronized and can pass
data
Green blinking: no PME is synchronized and at least one
PME is in training process
Red blinking: no PME is synchronized or in training
process, and at least one PME is in PAF establishment
stage
Red: no PME is synchronized, in training process, or in
PAF establishment stage
On: A new alarm is detected in the alarm buffer
Off: No alarm currently detected
On (green): Ethernet port link is up
Off: No Ethernet link on the port
Blink (yellow): Ethernet traffic on the port
Wide-range power supply: 100-240 VAC, -48/60 VDC
nominal
4 × Ethernet Port
2-wires: 5.2 W
4-wires: 5.5 W
8-wires: 7W
Installation and Operation Manual
ASMi-54 Ver. 1.0