Access RAD ASMi-54 Installation And Operation Manual page 21

Installation and Operation Manual
1.2
ASMi-54 is a 1U high standalone device in a plastic or metal enclosure.
Figure
and SHDSL interfaces. The front and rear panels are shown in
The LEDs are located on the front panel. The interfaces and connectors are
located on the rear panel. For more information, see
ASMi-54 can be powered by wide-range AC/DC (100-240 VAC, -48/60 VDC
nominal).
1.3
This section describes the major functional features of ASMi-54.
Interfaces
Ethernet Interface
The Ethernet physical interface is 10/100BaseT. The interface supports
autonegotiation.
WAN Interface
The SHDSL interface supports ITU-T G.991.2, ETSI 101524, and IEEE EFM
(IEEE802.3ah) standards for SHDSL.
Control Interface
The Control port connects directly to an ASCII terminal for managing the ASMi-54.
ASMi-54 Ver. 1.0
Physical Description
1-2
shows a three-dimensional view of the ASMi-54 unit with Ethernet
Figure 1-2. ASMi-54 Front View (Plastic Enclosure)
Functional Description
Chapter 1 Introduction
Chapter 3.
Chapter 2
.
Functional Description 1-5