Access RAD ASMi-54 Installation And Operation Manual page 72

Chapter 4 Configuration
Configuring a Bridge Port
To configure a bridge port:
1. Select Main Menu>Configuration>Applications>Bridge>Bridge Ports.
2. Select Bind to define which port the bridge port should be bound to.
Note
•
The Bind option does not appear for Bridge port 1 (Management host). The
host cannot be bound.
•
Usually there is not need to bind BPs, as all are bound in the default
configuration.
Configuration > Application > Bridge > Bridge ports > Bind
1. Fast Ethernet [number] / PCS [Number]
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
3. Select Fast Ethernet, and type the number of the Fast Ethernet port / PCS to
The Bridge may have a total of six Bridge Ports (BP). BP1 is dedicated to the IP
Note
Host. BP2-6 may be bound to Fast-Ethernet ports 1–4 or to the PCS port.
4. Press <S> to save the changes.
5. Press <ESC> to return to the Bridge Ports menu.
6. In the Bridge Ports menu, configure the Bridge Ports parameters
7. Press <S> to finish the bridge ports configuration.
Configuring VLAN Membership
To configure VLAN Membership:
1. Select Main Menu>Configuration>Applications>Bridge.
2. Select VLAN Membership.
3. Select VLAN ID, and type the VLAN ID you wish to configure.
4. Select Egress Tagged Ports. Define the set of ports to transmit packets for
4-22 Configuring for Operation
The Bridge Ports screen appears (see
The Bind screen appears (see
Figure 4-24. Bridge Ports Bind Screen
which you want to bind the bridge port.
Table 4-7
(see ). The settings pertain to the port to which you bound the
bridge port in the previous steps.
The Bridge screen appears (see
The VLAN Membership screen appears (see
this VLAN as tagged.
Installation and Operation Manual
Figure 4-23 ).
Figure 4-24
).
ASMi-54
Figure 4-20
).
Figure 4-25
...(1)
).
ASMi-54 Ver. 1.0